Dr Scientist Miniberator Reverberator Reverb Pedal
Reverb
that is thick, luscious, and bigger than the universe... but is in a
package that fits in the palm of your hand and weighs less than a
pound. That is exactly what you get with the Dr. Scientist
Mini-Reverberator!
The Mini-Reverberator offers up 9 different reverb settings at a 24-b A/D/A conversion rate which gives you a pristine, spotless, high fidelity reverb that can be blended into your analog dry signal. The Level, Mix, and Decay Time switch give this pedal even more versatility so you can always get just the right amount of reverb you are looking for.. from a subtle ambiance all the way to a cosmic tidal wave.
Controls:
Reverb Rotary Switch:
This rotary switch allows you to switch between the 9 different reverb modes.
H1 - Bright Hall
H2 - Warm Hall
R1 - Hardwood Room
R2 - Standard Room
R3 - Warm Room
P1 - Standard Plate
P2 - Bright Plate
P3 - Short Vintage Plate
R0 - Rotating Speaker Effect with Room Reverb
Level:
A unity gain and above clean boost circuit with close to +20dB of clean boost available. All the way down keeps the signal level stays at bypass level.
Mix:
The Mix knob lets you to blend between your wet and dry signal. All the way down the reverb is bypassed, at half way it is a 50/50 wet/dry blend, and all the way is 100% reverb.
Decay Time Switch:
Allows you to switch between a short and long reverb decay time.
*NOTE* - The Mini-Reverberator DOES NOT operate with a battery. You must use a BOSS style 9VDC center pin negative power supply.
The Mini-Reverberator offers up 9 different reverb settings at a 24-b A/D/A conversion rate which gives you a pristine, spotless, high fidelity reverb that can be blended into your analog dry signal. The Level, Mix, and Decay Time switch give this pedal even more versatility so you can always get just the right amount of reverb you are looking for.. from a subtle ambiance all the way to a cosmic tidal wave.
Controls:
Reverb Rotary Switch:
This rotary switch allows you to switch between the 9 different reverb modes.
H1 - Bright Hall
H2 - Warm Hall
R1 - Hardwood Room
R2 - Standard Room
R3 - Warm Room
P1 - Standard Plate
P2 - Bright Plate
P3 - Short Vintage Plate
R0 - Rotating Speaker Effect with Room Reverb
Level:
A unity gain and above clean boost circuit with close to +20dB of clean boost available. All the way down keeps the signal level stays at bypass level.
Mix:
The Mix knob lets you to blend between your wet and dry signal. All the way down the reverb is bypassed, at half way it is a 50/50 wet/dry blend, and all the way is 100% reverb.
Decay Time Switch:
Allows you to switch between a short and long reverb decay time.
*NOTE* - The Mini-Reverberator DOES NOT operate with a battery. You must use a BOSS style 9VDC center pin negative power supply.
Enjoy a few sound clip of this amazing
little device.
