Diamond Memory Lane 2 Delay Pedal - Seafoam Green
Humbucker Exclusive! In
stock right now!
The Diamond Memory Lane 2 - the evolution of
analog delay.
The Memory Lane 2 expands on the innovations of
the original
Memory Lane offering several new features requested by players and a
new twist that further bridges the feature gap between analog and
digital delays while retaining the warmth and unique sound of bucket
brigade delay devices in an all analog signal path.
With this newly revised version of our highly
acclaimed analog
delay pedal players now have the ability to control delay time via an
expression pedal input, footswitch between two independent delay times:
one set via the Delay knob, the other set using the tap tempo
footswitch function. In addition, we've added a dotted 8th note setting
for producing 'U2 style' rhythmic delays.
Slapback mode-
We've also added a 'slapback' switch to the back of the pedal which
allows DLY1 to be set to a single repeat while DLY2 can have as many as
you like further enhancing the useability of the pedal.
Spaceship mode-
many players loved the way the original Memory Lane could easily be
coaxed into self oscillation, but for some players it was a little too
easy. We've reduced the sensitivity of the default mode for higher
feedback (more repeats) before self oscillation but for the players who
are into those jet-fuled, screaming self oscillation sounds, there's an
internal switch to enable 'Spaceship mode". In this mode the Feedback
path is even more sensitive than the original Memory Lane- fun, fun,
fun!
Memory Lane
'Upgrades'
- We've been asked a lot about upgrading the original Memory Lane
pedals to Memory Lane 2 specification. Unfortunately this isn't
possible as the internal layout is different between the two pedals- if
you look inside the original you'll see that a large section of the PCB
is located where the DLY1/DLY2 footswitch is on the Memory Lane 2. It
isn't physically possible to mod the original to the new version.
Feature
List:
|
- 550 ms approx analog
delay time using
2 NOS MN3005’s running at 15V
- expression pedal input to control analog delay time
- tap tempo footswitch control of analog delay time, with dotted 8th
note setting for rhythmic delays
- footswitch between 2 completely independent delay times: one set
using tap tempo, one set using Delay knob
- vibrato modulation depth and speed controls
- tilt EQ in delay / feedback path provides subtle control
over frequency spectrum of repeats (from increasingly
dark repeats to flat to increasingly bright repeats)
- 'kill-dry' delay only output for amplifiers with
parallel effect loops
- inserting cable into delay only output jack automatically
removes delay signal from mix output giving separate
direct only and delay only outputs
- true bypass operation for mix/direct output
|
- pristine
signal paths using premium opamps,
polypropylene caps and metal film resistors
- expression pedal input to control feedback level
- ability to use standard 1/4" stereo to two 1/4"
mono insert cable in expression pedal input to insert
an effect or chain of effects into the feedback loop
(can also be used to insert a standard volume pedal
as feedback control)
- LED flashes for visual feedback of delay time
- self-oscillating feedback path with ability to shape
via feedback EQ in realtime
- analog voltage supply internally regulated to 15V for
low noise operation and increased headroom in line level
effect loops
- rugged genuine Hammond aluminum diecast enclosure
- DC adapter included |