BLUE The Dragonfly Microphone - Blowout Pricing
In
stock right now at a BLOWOUT price!
BLUE's
knockout punch microphone! Complete with an integrated
elastic Shockmount, this
class A discrete, transformerless microphone offers a rotating capsule
grill that can be positioned in the most difficult of areas. Countless
hours of research and development were spent to test and select the
most suitable active and passive components. This no compromises
process, can assure the low noise, high dynamic range and unappreciable
distortion of the microphone circuitry. The end result give the
Dragonfly a complete sonic neutral electronics with a low output
impedance and no side effects from the cable capacitance and load
impedance. This way only the capsule determines the sound. The
Dragonfly incorporates the BLUE hand-crafted 1" active diameter
capsule. For this diaphragm they selected a 6 micron mylar film which
has been sputtered with a special mixture of pure gold and aluminum.
The capsule operating principle is a pressure gradient with the pickup
pattern being cardioid. The dragonfly is packaged in an attractive
linen box. A matched set of Dragonfly's can be specially ordered. These
uniquely colored mics are built in a limited edition only basis.
Capsules are measured in out anechoic chamber to provide the end user
with a balanced sound for stereo and critical recordings.
Type of mic amplifier: Solid State Discrete class A
Type of Transducer: Pressure
gradient
Directional Pattern: Cardioid
Frequency Response: 20Hz–20,000
Hz
Rated source impedance: 50
ohms
Recommended load impedance: not
less than 1000 ohms
Sensitivity: 20mV/Pa
Signal to noise ratio: 69db
(related to 1 PA at 1khz) Max.
Sound Pressure Level for 0.5% THD: 132db
Power Requirements: 48
volt phantom (DIN 45596, IEC8 15)
Net weight: 640g
Dimensions: 235mm x
45mm
Connector: 3 pin XLR-type